TegoPlus®

TegoPlus^®

DOWNLOAD PRODUCT SHEET

UV protected polycarbonate corrugated sheets with “microalveolare” structure for roofing and transparent curtain walls

TEGOPLUS® corrugated sheet of polycarbonate “microalveolare” structure produced in different profiles for the construction of skylights, walls, transparent roofs also in combination with cover plates and insulated panels. The versatility of this product allows you to create skylights, gutter-ridges or eave inter-layers.

Corrugates profiles

Wave profiles

Features

Advantages
Easy and low-cost installation
Light transmission
Resistance to UV rays and to hail
Longitudinal overlap
Transverse overlap
Fire reaction EN 13501-1 EuroClass B-s1,d0

Applications
Green house
Roofing
Skylights

Production standards

Thermal insulation	4,6 W/m²K
Linear thermal expansion	0,065 mm/m°C
Temperature range	-40 ÷ 120 °C
U.V. rays protection	Coextrusion
Fire reaction EN 13501-1	EuroClass B-s1,d0
Available colors	Cristal/Opal

Easy installation

Element overlapping

The minimum overlap of the TEGOPLUS® sheets in width should be 120 mm

End protrusion

At the end of the covering the sheets must not protrude more than 100 mm above the gutter

Sheet cutting

TEGOPLUS® sheets can be cut with a circular saw, small-toothed, at high speed of rotation, being careful to advance slowly. You can also use jig saws or shears. In any case, it is important to support the sheet in the vicinity of the point of cutting and to eliminate the dust generated by cutting.

Mounting the panels

The fixing of the plates TEGOPLUS® must take place in correspondence of the structures of each high ridge, with screws 6,3 x 80 mm, fitted with sealing provided by dott.Gallina. The use of other types of fasteners may alter the resistance of the sheets. For the fastening a pre-drilling is advisable, made with a metal tip with a diameter greater than 2 mm to that of the screw. The excessive tightening of the fasteners, preventing movement of the plates due to thermal expansion, may compromise the seal.

Easy installation arcoPlus^®Onda curved

Transversal skylight details

The different sections of TEGOPLUS® sheets compatible with most of the insulated panels and corrugated sheets on the market, make this product suitable for the realization of transverse inter-layer skylights. During installation you must install the panels on the roof in reverse order to the direction of prevailing winds.

Skylight gutter ridge application details

TEGOPLUS® sheets allow a perfect side overlapping with all roofing systems granting the realization of ridge-eave skylights. To avoid cracks in correspondence to the fixing, due to thermal linear expansion, the maximum useful length of TEGOPLUS® sheets is recommended at 5,000mm.